Mstar Tool Operating Guide
(1). H/W Connection
(2). Software Install
(a). Copy “FTCJTAG.dll” to the PC system path “c:\windows\system32”.
(b). Directly double click “ISP_Tool.exe” file to run..
(3). Software Setting
Press “Config” button and see the default setting should be like as beow.
(4). Programming Steps
Step1. Press “Connect” button to connect the monitor.
If connected OK, it will show the detected Device Type information.
Step2. Press “Read” button to read the bin file that you want to program.
( for example, “ET2400L_TPS_AAECH.BIN” )
Step3. Press “Auto” button for switching to the programming page
and “Run” button to start the programming procedure.
Step 4. F/W programming is done and verify OK.
